Tag Archives: abrasive

  • ViscoTec dispenser integrated in an automated robotic system.

    Sensitive dosing tasks? Highly viscous, abrasive, shear-sensitive?

    Dosing tasks appear to be easy – at first glance. Adhesives, silicones, sealants … the automated application of various viscous  materials has been used for decades. So, where’s the problem? Only an optimal combination of several influencing factors guarantees a perfect dosing process with repeatable results. Challenges in dosing tasks The automated application of various […]

  • dosing foods with the vhd dosing pump

    Stress test – for best taste

    ViscoTec’s dosing pumps have already proven themselves in many areas of application. Particularly when it comes to the reliable and permanent dosing and filling of abrasive materials. After a challenging endurance test for the food industry, their wear resistance has been confirmed once again – this time with filling abrasive spice pastes. High demands on dosing components […]

  • stator after field test with abrasive solder paste

    Field test with abrasive copper solder paste

    ViscoTec dispensers are often integrated into fully automated systems as large scale paste application systems. This is just the case at one of the leading tier-one automotive supplier in Germany. Here, a glycol-based, highly filled copper solder paste is in operation. Due to the high degree of filling, the density is approximately 4,0 g/cm³. The […]

  • Stator-EPDM

    New: wear-resistant stator material

    The requirements for dosing systems are particularly high and nowhere more so than with regard to hygiene. The use of abrasive media often leads to increased mechanical wear on components. Some fluids even seem inadequate to be integrated into fully automatic production lines and to be filled with process reliability. This has motivated ViscoTec Pumpen- […]

  • gapfiller-abrasiv-raupenauftrag

    Dosing abrasive thermal paste in cyclic operation

    Abrasive thermal pastes are found in a range of applications. In the production of LEDs and circuit boards in the electronics industry and in the area of control systems in automotive applications – to name but a few examples. Through the regulation of thermal resistance, these pastes, referred to as gap fillers, ensure the heat […]

  • Peelingpaste dosieren

    ViscoTec’s Hygienic Dispenser for cosmetics

    Filling and dosing in the cosmetics industry are subject to strict guidelines. In addition to the statutory and general marketplace standards, there are also those determined by the product itself. In this case these are gels with micro-particles that bring the processing process of some dosing systems to their limits. Micro-particles, such as ground seeds […]

  • Dispenser RD-EC Reihe Überblick

    Sourcing market for dosing technology

    The basis of each dosing process revolves around the medium and the method of application. After successful selection of a medium, it is necessary that the medium is dosed, applied or filled with high precision and high repeatability to ensure process reliability. For such applications, various factors must be considered when selecting the dosing technology […]

  • Strukturen_3D-Druck

    3D Printing of abrasive Materials

    The importance of 3D printing increases sharply in many areas. There are many “makers” in the private sector creating objects by 3D printing according the motto “do it yourself”. On the other side there are lots of new applications in the industrial 3D printing, also called “additive manufacturing”. The volumetric dosing technology from ViscoTec Pumpen- […]

  • R-270_Low-M

    Filling of abrasive fluids into tubular bags

    Abrasive fluids like salt-based minerals are filled into different sized tubular bags and used in thermal energy storage and in cold storage. The materials lend themselves to specific cooling and warming conditions. In the case of cooling with frozen packaging, the risk is that the cooling period is not sufficient. By using salt-based minerals as a […]

  • viscotec_pharma_dispenser_VPHD

    Pharma Dispenser for filling medical gel for the treatment of skin cancer

    High accurate dosing of low to high viscosity pharmaceuticals – gentle filled with the new ViscoTec Pharma Dispenser VPHD with endless piston principle. The customer wants to fill a higher viscosity medical gel (for the treatment of cancer) at 50 cycles/min, respectively 0.25 ml per second with a hygienic pharmaceutical filling line. The viscosity of […]

  • ViscoTec auf der PSECE Messe in Manila

    ViscoTec at PSECE Exhibition in Manila

    The PSECE, one of the world’s largest electronic trade shows, was held from June 4th to 6th, 2014, in Manila. In these surroundings, ViscoTec presented itself and the trade mark preeflow as a manufacturer of dosing and micro dispensing systems, which have proven to be successful in various manufacturing scenarios for the electronic industry. High-precision […]