Tag Archives: dispensing

  • Der kuka Roboter KR 30 Nahaufnahme

    New KUKA robot for dispensing tests

    The ViscoTec Customer & Innovation Center (CIC) which opened in September 2017 has now one more highlight. A new KUKA robot for precise customer pretests complements the technical laboratory equipment. With its ultra-modern technical centres, the CIC offers optimum conditions and sufficient space for numerous customer tests. To further expand and improve the customer service […]

  • Exzenterschnecken-Technologie: Jeder einzelne Hohlraum liefert ein genau definiertes Materialvolumen und dient gleichzeitig als Dichtungslinie in Richtung Pumpe, zwischen Ein- und Ausgangsseite.

    Improve your fluid dispensing process

    ViscoTec’s positive displacement systems for 1-component and 2-component fluids and pastes are based on the “endless piston principle”. The two main components, rotor and stator are creating, geometrically constant, cavities that generate a constant flow rate without pulsation. This design allows many advantages when dispensing a variety of fluids such as UV adhesive, 2-component epoxy, […]

  • Bayers Best 50 Preisverleihung Gruppenbild 2018

    Bayerns Best 50 winner delivers dosing systems all over the world

    ViscoTec, manufacturer of precise dosing, emptying and treatment systems, was awarded the “Bayerns Best 50” title for the second time on 23 July 2018 at a festive evening event at Schleißheim Castle. Bavaria’s Minister of Economic Affairs, Energy and Technology Franz Josef Pschierer personally presented the 50 best companies with a certificate and a bavarian […]

  • 2-component-edge-sealing

    ViscoTec at the expoAIR 2017 in Munich

    As an expert for dosing technology ViscoTec Pumpen- u. Dosiertechnik focuses primarily on challenging dosing applications in various industries. Due to complex requirements of materials used in aerospace industry, applications in this sector are in general extremely demanding. Different viscosities, thixotropic properties and a high share of solids require a very gentle handling of the […]

  • dosing-abrasive-fluids

    Perfectly dosed – also for electro mobility

    How do people move around, how are products shipped across countries and seas? Whether on land, in water or in the air: The trend of electro mobility today calls for solutions for the future of tomorrow. In three years the federal government wants one million electric vehicles on the road, and in 2023 six million. […]

  • ViscoTec dispenser integrated in an automated robotic system.

    Sensitive dosing tasks? Highly viscous, abrasive, shear-sensitive?

    Dosing tasks appear to be easy – at first glance. Adhesives, silicones, sealants … the automated application of various viscous  materials has been used for decades. So, where’s the problem? Only an optimal combination of several influencing factors guarantees a perfect dosing process with repeatable results. Challenges in dosing tasks The automated application of various […]

  • Stator-EPDM

    New: wear-resistant stator material

    The requirements for dosing systems are particularly high and nowhere more so than with regard to hygiene. The use of abrasive media often leads to increased mechanical wear on components. Some fluids even seem inadequate to be integrated into fully automatic production lines and to be filled with process reliability. This has motivated ViscoTec Pumpen- […]

  • ViscoTec Pharma Dispenser Laborraum

    Flexible dosing systems expand application fields

    In pharmaceutical development laboratories and even pharmacies, many different products are filled daily, from liquids and semi-solids to suspensions, for small batches or clinical trials. Due to the constantly changing composition in this phase and consequently the changing physical properties of the fluid, this often presents a problem in the selection of a suitable filling […]

  • gapfiller-abrasiv-raupenauftrag

    Dosing abrasive thermal paste in cyclic operation

    Abrasive thermal pastes are found in a range of applications. In the production of LEDs and circuit boards in the electronics industry and in the area of control systems in automotive applications – to name but a few examples. Through the regulation of thermal resistance, these pastes, referred to as gap fillers, ensure the heat […]

  • Dispenser 8 kpl. 3D

    New ViscoTec Hygienic Dispenser at FachPack 2016

    The VHD Hygienic Dispenser is this year’s product innovation from ViscoTec. It promises huge potential for optimising precision dosing in the food and cosmetics sectors. Based on ViscoTec’s proven endless piston principle, the dispenser impresses not only with its accuracy and precision but also with its ability to meet the most stringent hygiene requirements. Dosing […]

  • shimming in aviation industry

    Semi-automated shimming in aviation industry

    Shimming applications. As an expert for dosing technology ViscoTec Pumpen- u. Dosiertechnik focuses primarily on challenging dosing applications in various industries. Due to complex requirements of materials used in aerospace industry, applications in this sector are in general extremely demanding. Different viscosities, thixotropic properties and a high share of solids require a very gentle handling […]

  • ViscoTec 3 VHD 12 Hygienic Dispenser

    New hygienic dispenser focuses on dosing in small quantities

    The need to meet the growing demands in the production of food and cosmetics was the intention of the product management team at ViscoTec GmbH in the development of the new hygienic dispenser. Reliable, precise and reproducible dosing of products with a wide range of viscosities and abrasiveness on semi and fully-automatic filling lines  ̶ […]